How to get more aero without spending a fortune

From road.cc

Aerodynamics has become the hottest word in road cycling, with deep section wheels, aero frames, and helmets a common presence not only in the professional peloton but also with amateur racers and club riders.

At higher speeds it is air resistance that consumes almost your entire power output. Travelling at about 20mph, up to 90% of your effort is used to overcome the air resistance, to push the air out of the way. You might think that only racers can benefit from improving aerodynamic efficiency, but in fact, most cyclists can benefit from a few aerodynamic tweaks.

The latest aerodynamic equipment can cost a small fortune, though. It’s even possible to book time in a wind tunnel if you’re feeling particularly flush and want to do a proper job of reducing your drag and have results to validate the improvements.

 

Close-fitting clothing

The cyclist causes about 80% of the air resistance (drag) so there are significant performance gains to be had by taking a closer look at your outfit. Loose and flappy clothing just catches the wind and massively increases your drag.

So close-fitting clothing is good, then. Choose a jersey and shorts that have a snug fit and in particular fit really well around the torso and shoulders. It’s not just racers that benefit from close-fitting clothing, you’ll benefit during a sportive even at lower speeds because a slower cyclist spends more time on the road so saves more time.

Most of the professional teams now wear clothing that has been developed in the wind-tunnel, with aero suits (skin suits with pockets and long zips) a common sight in the peloton. But you don’t have to drop your month’s salary on the latest aero clothing, going down a size is a simple way to achieve this.

 

Zip up your jersey

Riding along with your jersey or gilet unzipped and flapping in the wind might keep you cool, but it will generate loads of drag. You might as well wear a parachute. Unless you’re grinding up a steep climb below the speed at which air resistance is a factor, keep the jersey zipped up. You might be hot, but you’ll be fast.

 

Get your head down

As your body causes most of the drag, getting your head down is a simple way to reduce drag. You’re aiming to reduce your frontal surface area, and keep your position as sleek and low profile as possible. A dropped riding position can reduce your drag by as much as 7.8% according to a study by Engineering Sport.

The drops aren’t just for the descents you know. Get your head and back down low by using the drops on the flat roads, you’ll be surprised at the difference. If your drops are hard to reach, consider putting some spacers under the stem to raise them. The more you ride in the drops the more you’ll get used to the position as well. Additional core work can also be beneficial.

Alternatively, use the hoods to adopt an aero position by keeping your forearms straight and your elbows tucked in and at a 90-degree angle, this will reduce your frontal surface area. This position isn’t always as comfortable as riding in the drops, but it has the potential to be faster because your arms aren’t straight like they typically are in the drops.

How do you know if any changes you make have reduced drag? In an ideal world, you’d be in a wind tunnel to validate the changes, or taking to a velodrome with a power meter. A power meter can be used out on the road, but controlling the variables is tricky. A simple roll down test doesn’t cost anything and can easily be repeated with just simple cycle computer required to track changes. This provides an easy way of trying different positions.

 

Shave your legs
Racing cyclists are famous for their shaved legs, and as much ridicule as removing leg hair can generate, the science says that smooth legs are faster. Specialized aerodynamicists used their wind tunnel to show that shaved legs can save as much as 80 seconds over 40km. So when your other half asks why you’re shaving your legs, just tell them it’ll make you quicker.

 

Tape up those air vents

All those vents in a cycling helmet are designed to suck in cooling air to prevent overheating on a warm ride, but if you cover them up, you have yourself an aero road helmet without spending any dosh. An aero helmet, with no vents, could save you as much as 40 seconds over a 40km course compared to a regular vented helmet, according to wind tunnel tests by Specialized.

Take a leaf out of the British Cycling book, which in 2011 provided a helmet with a thin plastic covering, to smooth over the vents, for Mark Cavendish to ride, and win, the world championships. You could get a similar result with some cling film. It might lead to overheating in warmer weather, but what price for reduced drag?

 

Wheelsuck

That’s right, get on another cyclists wheel and hide in their slipstream, it’s an easy way to reduce drag. Make sure to pick a cyclist that’s bigger than you, and you could reduce your drag by as much as 40%. You may be required to do a turn at the front, though.

 

Get a motorbike to follow you closely

Okay, so we’re not actually advising you do this, but an interesting study recently showed that a close following motorbike can actually help to improve your drag.

– See more at: road.cc